2,251 named trails across 6,238 miles of mapped centerlines — every state-managed corridor and community-mapped path in the Adirondack Park, cross- referenced with trailheads, lean-tos, parking, and the peaks they climb. Use the map to get your bearings, then narrow the list by region, operator, or what the trail reaches.
Valley Run is a tenth-of-a-mile connector, likely part of a larger trail network where short segments link longer routes or facilities. At 530 feet, it's brief enough to serve as a spur to a viewpoint, a cut-through between parallel trails, or access to a trailhead amenity. Check local trail maps to see what it bridges.
Valley Trail covers less than a mile through terrain that likely lives up to its name—lower elevation, gentler grades than the ridge routes nearby. At 0.8 miles, it's brief enough for a quick out-and-back or as a connector in a longer loop. Expect a straightforward walk suitable for most hikers, though conditions vary by season and recent weather.
The Van Dusen Connector covers half a mile between two points in the trail network, likely linking a named trailhead or path to another route. These short connectors often see less traffic than main trails but serve an important routing function for through-hikers or loop builders. At 0.5 miles, it's brief enough to walk in under 20 minutes on level ground.
This half-mile connector runs within the extensive trail network at the Mount Van Hoevenberg recreation area near Lake Placid, a venue developed for the 1980 Winter Olympics. The route links cross-country ski trails in a system that sees year-round use for hiking, mountain biking, and Nordic skiing depending on season. At 0.5 miles, it's brief enough to serve mainly as access between longer loops or facilities.
Marked by blue disks and maintained by the NYSDEC, this extensive footpath traverses more than eighteen kilometers through the High Peaks region, offering one of the longer single-trail experiences in the Adirondack backcountry. The route is reported to present varied terrain and often demanding ascents that reward those prepared for a sustained wilderness journey. Its considerable length makes it best suited to experienced hikers seeking a full day's immersion in the mountains, though the trail's character and difficulty are said to shift considerably along its course.
This 4.7-mile snowmobile route runs through the Vanderwhacker Mountain Wild Forest in the central Adirondacks, maintained for winter motorized use. The trail provides a straightforward corridor through mixed forest, typical of the region's designated snowmobile network. During snow season, it connects riders to the broader Hamilton County trail system.
The Vanderwhacker Trail runs 2.7 miles through the Vanderwhacker Mountain Wild Forest in the central Adirondacks. This moderate hike follows an old route toward Vanderwhacker Mountain, gaining elevation gradually through mixed forest typical of the region's mid-elevation terrain. The trail serves primarily as access for those headed to the fire tower summit or exploring the more remote corners of this designated Wild Forest area.
The Varney Trail is a short 0.3-mile connector in the Adirondack network, brief enough for a quick leg-stretcher or link between longer routes. At half a kilometer, it's more transition than destination, the sort of segment that shows up on topo maps as a dotted line between more prominent paths. Expect minimal elevation change and a walk measured in minutes rather than hours.
Ve Tr is a short route covering just under a mile through the Adirondacks. At 0.9 miles, it's brief enough for a quick out-and-back or a leg-stretcher before or after a longer outing. The abbreviated name suggests it may be a connector or spur within a larger trail network, though specifics aren't widely documented.
Venom Flow is a brief mountain bike feature under 600 feet long, likely serving as a short technical segment or connector within a larger trail network. At this length, it's effectively a quick hit—expect a concentrated burst of terrain rather than sustained riding. Built for bikes, not boots, and named with the kind of edge that usually signals roots, rocks, or tight turns.
The Vergennes Connector Trail is a short 0.4-mile link trail likely serving as a pedestrian or multi-use route within or near the city of Vergennes. At less than half a mile, it functions more as an access corridor than a destination hike, connecting neighborhoods, parks, or other trail segments in the area. Expect an easy, flat grade suitable for quick walking commutes or casual strolls.
Vice Road runs 3.9 miles through the Adirondack backcountry, likely following an old woods road or right-of-way given its name. The route's straightforward designation suggests a utilitarian corridor rather than a recreational footpath, possibly providing access to interior points or serving as a connector between established trail networks. Check current conditions and land access status before heading out, as roads like this can see infrequent maintenance.
Viele Pond Road is a short 1.2-mile route in the Adirondacks, likely following an old access road or woods path toward its namesake pond. The distance suggests a quick out-and-back or connecting segment rather than a destination hike. Check local trail registers or DEC signage for current conditions and access details.
This half-kilometer connector runs through the village area, marked by yellow triangles and suitable for casual walking in street shoes. At roughly 0.3 miles, it's brief enough for a quick leg-stretch between other activities. The yellow triangle blazing distinguishes it from other local routes sharing the same trail network.
Villnave Road is a short 0.6-mile route in the Adirondacks, likely a connector or access road rather than a backcountry trail. At just under a kilometer, it's brief enough for a quick out-and-back or as part of a longer loop. Check local trail networks or mapping resources to confirm current access and whether it links to maintained hiking paths.
Vista Loop is a brief 0.2-mile circuit—among the shortest named trails tracked on betatrails.org. At roughly 300 meters end-to-end, it's closer to a scenic overlook walk than a hike, likely suitable for a quick viewpoint stop. Expect minimal elevation change and a loop you can complete in under ten minutes at a casual pace.
This half-kilometer access road leads to the Vista Trail trailhead, serving as the approach route rather than the main hiking objective. At 0.3 miles, it's a brief connector that gets you from wherever you've parked to the trail proper. Expect a service road surface—likely gravel or dirt—maintained enough for vehicle or foot traffic depending on season and gate status.
