2,611 named trails across 6,101 miles of mapped centerlines — every state-managed corridor and community-mapped path in the Adirondack Park, cross- referenced with trailheads, lean-tos, parking, and the peaks they climb. Use the map to get your bearings, then narrow the list by region, operator, or what the trail reaches.
This half-mile trail is short enough for a quick out-and-back but long enough to earn its own designation in the network. The name suggests it leads to or from a backcountry structure, though without additional context the specific destination remains unclear. At 0.5 miles, expect roughly 15–20 minutes of walking each way under typical conditions.
This 0.2-mile connector does exactly what its name suggests, linking a cabin or lodging area to a larger trail network. It's the sort of short utility segment that lets you reach trailheads or loop routes without backtracking on roads. Expect minimal elevation change and a quick walk—under ten minutes for most hikers.
Calamity Trail runs 1.9 miles through terrain that earns its name, though records of how remain elusive. The moderate length makes it accessible as a morning or afternoon outing, suitable for hikers with basic conditioning. Expect uneven footing and potentially rugged sections—bring sturdy boots and allow extra time if conditions are wet.
California is a short half-kilometer connector in the Adirondacks, brief enough to link two points without much elevation change or time commitment. At 0.3 miles, it's likely a spur or junction segment within a larger trail network rather than a destination itself. Expect it to take under ten minutes at a steady pace.
Canyon Bridge is a short footbridge crossing in the Adirondack trail system — no mileage on record, rated for standard hiking. Serves as a connector or access point rather than a destination trail.
A direct ascent to one of the most accessible summits in the High Peaks, this trail climbs steadily through northern hardwood and conifer forest for roughly three kilometers, marked by red disks maintained by the NYSDEC. The route is reported to be among the most heavily traveled in the region, owing to its relatively modest length and the commanding views its bare rock summit affords. From the top, on clear days, a sweeping panorama of neighboring peaks and the surrounding wilderness unfolds—a prospect that has long drawn both novice and experienced hikers to this corner of the Adirondacks.
This 0.1-mile trail at Ausable Chasm connects visitors to the namesake cave formations and waterfall features within the privately operated gorge attraction. The short distance reflects a viewing trail rather than a backcountry route—expect boardwalks, stairs, and developed pathways designed for close access to geological features. Ausable Chasm operates as a guided experience with admission fees and seasonal hours.
Cedar Trail covers just over half a mile in the Adirondack Park, making it one of the shorter named routes in the region. At 0.6 miles, it's brief enough for a quick leg-stretch or an introduction to forest walking without committing to a longer day. The name suggests passage through cedar stands, though specifics about trailhead location and difficulty aren't documented here.
A prominent link in the Empire State Trail system, this nearly twenty-seven-and-a-half-kilometer section traces State Route 9 through the Champlain Valley between Keeseville and Plattsburgh. The route is reported to offer sweeping views westward toward the Adirondack peaks and eastward across the broad expanse of Lake Champlain, with pastoral farmland and rural Clinton County scenery unfolding along much of the corridor. Though it follows an active highway, the trail provides a relatively direct north-south connection for cyclists and long-distance travelers moving through the valley.
A local network route spanning just over fifty-one kilometers, this segment follows State Route 22 between Westport and Keeseville, offering what are reported to be sweeping views of the Adirondack Mountains, Lake Champlain, and the pastoral countryside of rural Essex County. The trail provides a sustained immersion in both natural grandeur and working landscape, threading through terrain that balances mountain vistas with the quieter rhythms of the Champlain Valley. Though it traces a roadway corridor, the route is said to reward travelers with long prospects and an unhurried sense of the region's character.
The Champlain View Trail covers 0.7 miles through what its name suggests—a route oriented toward Lake Champlain's western shore. At just over a mile round-trip, it's brief enough for a quick leg-stretch or an evening walk. Check local trail registers or maps for current trailhead access and whether the view requires any elevation gain or delivers from relatively flat ground.
This short red-blazed route climbs Clark Mountain in just over half a mile, making it a quick ascent by Adirondack standards. The trail gains elevation steadily but covers minimal distance, suggesting a relatively steep grade. Expect a workout compressed into a brief package—hiking boots recommended for the pitch.
Clements Pond Trail runs 1.5 miles to a backcountry pond, marked and maintained for day use. The route is short enough for a quick morning hike; the pond itself offers quiet water and limited shoreline access.
Cliff Hugger (Red) runs 1.2 miles through terrain that lives up to its name, hugging close to rock faces along its route. The red-blazed path is short enough for a quick outing but technical enough to demand attention on steep or exposed sections. Expect uneven footing and plan for hiking boots rather than trail runners.
Cliffside is a short 0.4-mile trail that likely delivers exactly what its name suggests—clifftop views or terrain with notable elevation relief. At under half a mile, it's a quick out-and-back or connector, the kind of segment that packs a punch relative to its modest distance. Expect a brief but potentially steep or exposed stretch, suitable for a quick scramble or scenic pause.
This half-mile connector is short enough to suggest a technical access route rather than a destination hike in its own right. The name implies steep or rugged terrain — likely a climber's approach or a spur linking trailheads to rock faces. At under a kilometer, it's a quick detour that may involve scrambling or exposed sections depending on the grade.
This short trail loops through the Clintonville Pine Barrens, a rare pitch pine-scrub oak community in the northeastern Adirondacks. At under a mile, it's an accessible introduction to a globally uncommon ecosystem shaped by thin soils and periodic fire. The trail is managed by The Nature Conservancy and offers an easy walk suitable for most visitors.
Cobble Hill's 1.1-mile route makes for a quick ascent, short enough for an evening outing or a warm-up hike. The trail climbs steadily through mixed forest to a modest summit, typical of the smaller peaks scattered throughout the Park. Expect a round trip under two hours at a moderate pace.
Col Holst is a short 0.7-mile connector in the High Peaks region, linking sections of the larger trail network near the Cold River valley. The name references a historical figure in Adirondack exploration, though the trail itself sees less traffic than the more prominent High Peaks routes. At just over a mile, it's typically used as part of a longer loop or through-hike rather than as a standalone destination.
Stretching more than nine kilometers through the High Peaks, this red-blazed route maintained by the state offers a demanding traverse of what is often considered some of the region's more remote and rugged alpine terrain. The trail is reported to link several summits along the Colvin massif, rewarding committed hikers with what many describe as commanding views across the central wilderness. Though the round red markers provide consistent guidance, the path's length and elevation gain make it a serious undertaking best suited to experienced parties prepared for a full day in the mountains.
This short 0.2-mile link does exactly what its name suggests—it bridges two routes or trail networks without much fanfare. Expect a quick walk through typical Adirondack woods, likely designed to save backtracking or open up loop options. Given the brevity, it's more utility than destination, the kind of segment that matters most when you're stitching together a longer day.
This short connector runs just under half a kilometer, linking sections of the trail network marked by blue circle blazes. At 0.3 miles, it's a brief passage—more utility than destination—designed to move hikers between longer routes without backtracking. Expect a quick walk through typical Adirondack forest cover.
A short, steep climb to a modest summit in the southeastern Adirondacks, Coon Mountain Trail covers less than a mile one-way and rewards hikers with open views from its ledgy top. The trail's brevity makes it a quick afternoon objective or a warm-up hike, though the grade demands steady effort. Expect rocky footing and some scrambling near the upper reaches.
Corridor 8 new is a half-mile connector trail that likely links segments of a larger trail network in the region. At 0.5 miles, it's brief enough to serve as a quick route between other trails or a short out-and-back for easy mileage. The "new" designation suggests recent construction or rerouting, though specific trailhead locations and junctions aren't documented here.
This short access path leads to Creature Wall, a rock climbing area. At just 0.2 miles, it's a quick walk in from the trailhead to reach the base of the cliff. Climbers use this approach to access the established routes on the wall.
Creekside runs a half-mile through terrain that typically follows water drainage patterns, as the name suggests. At 0.8 kilometers, it's a quick connector or short out-and-back suitable for most users. The brevity makes it a practical choice when time or energy is limited.
The Cross-Over Trail is a short connector route spanning just under a mile, typically used to link longer trails rather than as a destination itself. At 0.9 miles, it's brief enough to factor into loop options or as a quick cut-through between systems. These connector segments often see less maintenance than primary routes, so expect a narrower tread.
The Cutoff is a connector trail in the Adirondacks with no published length data, suggesting either a very short link between other routes or incomplete mapping. These named connectors typically join main trails or provide alternate access points within a trail network. Check current conditions and signage at trail junctions, as unmarked cutoffs can be seasonal or maintained informally by users.
