2,251 named trails across 6,238 miles of mapped centerlines — every state-managed corridor and community-mapped path in the Adirondack Park, cross- referenced with trailheads, lean-tos, parking, and the peaks they climb. Use the map to get your bearings, then narrow the list by region, operator, or what the trail reaches.
The Boundary Trail covers half a mile through the Adirondack Park, likely marking a property or management boundary as its name suggests. At under a kilometer, it's a brief walk suitable for a quick stretch or connector between longer routes. Check local maps or trailhead signage for current access points and any restrictions tied to boundary designations.
Boyea Road is a half-mile corridor that likely serves as a connecting route or access point rather than a destination trail in its own right. At 0.5 miles, it's brief enough to walk in under fifteen minutes at a steady pace. Check local maps or trailhead signage to confirm what it connects to and whether it's open to public use year-round.
Boyea Road is a half-mile route that likely serves as a connector or access path within the broader trail network. At this length, it's a brief walk—under 15 minutes for most hikers—making it more of a linking segment than a destination itself. Check local maps or trailhead signage to confirm where it ties into longer routes or reaches nearby features.
Extending roughly 12.6 kilometers through state forest land, this blue-disk-marked trail offers passage into a quieter corner of the Adirondack backcountry. The route, maintained by the NYSDEC, is reported to reach Bradley Pond itself, though the terrain and conditions can vary considerably with season. Hikers seeking a longer day or an overnight destination often find the trail suitable for both purposes, provided they are prepared for the distance and the character of the woods.
Bramwell Run is a tenth-of-a-mile connector in the trail network, short enough to cover in under five minutes at a casual walk. At this length, it likely serves as a link between other routes or provides access to a trailhead or feature rather than standing as a destination hike. Check current trail maps for its role in a longer route or loop option.
Branch Road runs 2.6 miles through what appears to be a multi-use corridor, likely an old woods road or seasonal access route. The name suggests a secondary spur off a larger road network, common in the Adirondacks where former logging roads now serve as hiking or snowmobile trails. Check local signage or DEC maps for current surface conditions and what it connects to—these unpaved routes can vary widely in maintenance and accessibility depending on the season.
Brandy Brook Flow Trail runs 1.5 miles through terrain shaped by beaver activity and seasonal water levels. The route offers straightforward walking conditions suitable for most hikers, though wet sections are common depending on beaver dam maintenance and recent precipitation. Expect to encounter muddy stretches and possibly flooded zones during spring runoff or after heavy rain.
Brewster Road is a half-mile connector route that likely serves as access between trailheads or local points rather than a destination hike in itself. At 0.5 miles, it's brief enough to walk in under 15 minutes at a casual pace. Short segments like this often fill gaps in trail networks or link residential areas to longer routes.
Bridge is a 0.0-mile trail segment — functionally a bridge crossing on a longer route. It exists in trail databases for mapping completeness, not as a standalone destination.
The Bridge with Flags registers no measurable length in the trail database, suggesting it may be a named waypoint, landmark, or short connector rather than a trail segment in its own right. Without distance or difficulty data, it's likely a local reference point—possibly a decorated footbridge or structure along a longer route. Check adjacent trails or local signage to understand its role in the broader network.
This short connector runs just half a kilometer, linking other routes rather than serving as a destination itself. The name suggests historical use for horse traffic, though current conditions and allowed uses would need verification at the trailhead. At 0.3 miles, it's a quick link — worth knowing about if you're piecing together a longer loop in the area.
This quarter-mile access road serves as a short connector in the northern Adirondacks, likely providing entry to a trailhead or backcountry feature along Brister Brook. At just 0.2 miles, it's more of a utilitarian approach than a destination itself. Expect an easy walk on what's probably an old woods road or maintained service route.
Broad Street is a 0.2-mile connector in the trail network, short enough to serve as a quick link between points rather than a destination in itself. At roughly four-tenths of a kilometer, it's the kind of segment that appears on longer route descriptions or gets used to access other trails. Given the brevity, expect a straightforward walk-through with minimal elevation change.
Broadway Ski Trail is a short half-kilometer connector in what's likely a groomed cross-country network, brief enough to link loops or access other routes rather than serve as a destination itself. At just 0.3 miles, it's a quick transition between junctions or facilities. Check local ski center maps for current grooming status and connections.
Bronson Road is a short 0.4-mile connector route in the Adirondacks, brief enough for a quick leg-stretch or access segment between longer trails or points of interest. Its road designation suggests an old throughway, possibly now gated or unmaintained, typical of historic routes that once linked settlements or logging camps across the backcountry. At under half a mile, it's a minimal commitment—plan it as part of a larger loop or as approach mileage rather than a standalone destination.
Brookside is a brief 0.2-mile connector that lives up to its name, likely following or crossing a small waterway. At this length, it's more transitional than destination—typically linking two longer routes or providing quick access between trailhead and junction. Expect minimal elevation change and a walk measured in minutes rather than hours.
Brookside Loop is a short, 0.4-mile circuit that likely serves as an introductory or family-friendly walk given its brief distance. The name suggests the route follows or crosses a small watercourse, though specific terrain and elevation change aren't documented. At less than half a mile, expect a quick out-and-back feel suitable for a leg-stretcher or a first hike with young children.
This short loop near Olmstedville covers just under two miles of terrain, making it an accessible option for a quick morning or afternoon outing. The trail's name suggests ledge outcrops along the route, typical of the eastern Adirondack landscape where exposed bedrock frequently punctuates forested sections. At 1.7 kilometers, it's brief enough to fit between other plans or serve as a warm-up hike.
This 1.3-mile trail leads to an overlook above the hamlet of Wells, offering views across the southern Adirondacks without the commitment of a longer climb. The route gains elevation steadily through mixed forest before emerging onto open ledges. It's a popular choice for a quick afternoon hike when you want elevation and exposure in under an hour.
Brown Tract Road is a short, 0.2-mile connector in the central Adirondacks. At roughly a tenth of a kilometer, it's likely a brief link between trailheads, campsites, or other forest roads rather than a destination in itself. Check local maps for what it connects to before planning around it.
Brown-Benoit Road is a short 0.9-mile connector in the Adirondack trail network. The brief distance makes it useful for linking longer routes or as a quick out-and-back. Like many secondary roads in the park, it likely sees less traffic than major arteries but serves hikers piecing together regional loops.
Brown's Notch Trail is a short connector spanning just over half a mile in the Adirondack backcountry. The brief distance suggests it likely links two trail systems or serves as access between features rather than functioning as a destination hike on its own. At under a kilometer, it's the sort of segment that appears on longer route itineraries more often than it gets walked alone.
Brownell Camps Road runs 3.1 miles through the Adirondacks, likely following an old access route to former sporting camps—a common pattern in the region's backcountry. These historic camp roads often see light use today, serving anglers, hunters, and hikers seeking quieter corners of the park. Expect a relatively flat grade typical of old service roads, though conditions can vary with seasonal maintenance and weather.
BTW is a very short connector at 0.4 miles, likely linking two points within a larger trail system. The brevity suggests a quick access route or alternate path rather than a destination trail. Best treated as a functional link — consult local maps or signage to confirm what it connects and whether it suits your route.
A short, steep climb to one of the few remaining fire towers in the southeastern Adirondacks, Buck Mountain rises from the shore of Pilot Knob on Lake George. The 1.1-mile ascent gains roughly 2,000 feet, making it a condensed vertical push that rewards hikers with panoramic lake views from the restored cab. The trail typically takes 1.5 to 2 hours round-trip and sees heavy traffic during summer weekends.
Buck Mountain from Hogtown is a 2.1-mile trail to the summit — the shorter of two routes up this Lake George peak. The trailhead sits on Hogtown Road; the climb is direct and the exposed rock summit delivers views across the southern basin.
Buck Mountain from Pilot Knob is a 1.9-mile trail to the 2,330-foot summit — short but steep, with exposed rock near the top. The summit offers open views over Lake George; the trailhead is off Pilot Knob Road with limited roadside parking.
This short connector links the Buck Mountain trail system with routes accessing Inman Pond, bridging two distinct hiking zones in a fifth of a mile. The trail serves primarily as a junction point rather than a destination, allowing hikers to extend loops or access alternate routes. At 0.2 miles, it's a brief transition that takes only a few minutes to traverse.
Buck Mt Trail is a 0.3-mile spur that reaches the 2,330-foot summit of Buck Mountain above Lake George. Short but steep in sections; the exposed rock ledge at the top gives south-facing views of the Narrows.
Buck Mountain Trail Section 2 covers 0.9 miles and continues the ascent to the 2,330-foot summit overlooking Lake George. The pitch steepens here, but the trail is well-worn and the payoff is a bare rock ledge with views across the southern basin.
This short connector links into the Buck Mountain trail system on the south end of Lake George, bridging sections of the network in under half a mile. At 0.3 miles, it's a quick transition segment rather than a destination in itself. Expect it to be used primarily by through-hikers piecing together longer loops or accessing Buck Mountain's main summit route.
Buck Pond Campground Road is a short, 0.6-mile access route connecting NY Route 30 to the Buck Pond State Campground in the northern Adirondacks. The road serves primarily as the main entrance to the campground's 116 tent and trailer sites, passing through mixed forest typical of the region. Visitors using the campground will find this road provides direct access to Buck Pond's shoreline and the adjacent trail network.
This 1.3-mile access road runs through the Buck Pond Campground area in the northern Adirondacks, connecting the campground's internal sites and facilities. The route is flat and suitable for families, serving primarily as a service and pedestrian path within the developed campground rather than a backcountry trail. Expect wide, maintained surfaces that remain accessible for most of the camping season.
Buck Snort is a very short connector at just 0.2 miles, likely serving as a link between larger trails or providing quick access to a nearby feature. At this length, it's over in minutes and more functional than destination-worthy. Check local trail maps to see what it connects — brief spurs like this often fill gaps in a larger network.
This short connector path at Buczek Wildlife Management Area runs just 0.1 miles and is marked with orange blazes. It likely provides pedestrian access between parking areas or links to other management area trails within the state-managed hunting and wildlife habitat property. Check locally for current trail conditions and seasonal hunting closures that may affect access.
Buggy runs a half-mile through terrain typical of short Adirondack connectors or loops, where the name likely hints at historical logging roads or marshy conditions that once made travel difficult. At under a kilometer, it serves as either a quick out-and-back or a link in a longer route. Expect a narrow tread and possibly wet footing depending on recent weather and seasonal drainage.
Bull Pen Road is a short, 0.6-mile connector in the Adirondacks, likely a former logging or access route now used for hiking or local travel. Trails of this length typically serve as links between larger networks or provide quick access to nearby features. Check current conditions and signage, as shorter named routes can vary in maintenance and marking.
Bull Road is a short 0.6-mile route in the Adirondacks, brief enough for a quick out-and-back or connector between longer trails. The name suggests historical use as a logging or access road, common throughout the park's working forest past. At under a mile, it's over in less than half an hour at a moderate pace.
Bull Rock Road is a short 0.4-mile route that falls on the shorter end of Adirondack access roads and connector trails. At just over half a kilometer, it likely serves as a link between trailheads or backcountry destinations rather than a destination itself. Expect quick passage—useful for those stringing together longer routes or accessing adjacent trail systems.
A brief connector within the Lake Harris Network, this yellow-blazed passage extends less than a tenth of a kilometer and serves primarily as an approach to Bumps Pond or as a link to longer routes in the area. The trail is marked with yellow discs and, despite its modest length, provides a clearly defined thread through the forest. Hikers often use it as a functional junction rather than a destination in itself, though the pond it accesses may reward those who follow it through.
Bunny's Boulevard (Red) covers 1.2 miles through terrain typical of marked Adirondack trail networks, where red blazes guide hikers along an established route. The moderate distance makes it accessible for most hikers looking for a shorter outing without committing to an all-day trek. Check local trail maps for current trailhead access and any seasonal considerations before heading out.
Burke Road is a short 0.7-mile route that likely functions as a connector or access path within the broader trail network. At just over a kilometer, it's brief enough to be a link between trailheads or a quick out-and-back for those exploring the immediate area. Without additional route details, expect a straightforward walk suitable for standard hiking footwear.
This short waterfront access point extends into Lake Champlain from Burlington's downtown shoreline, offering anglers direct access to deeper water without a boat. At roughly 0.1 km, it's more of a fishing platform than a trail in the traditional sense. Open year-round, though conditions vary with ice and weather.
The Burlington Greenway runs 1.1 miles through Burlington, Vermont—just across Lake Champlain from the Adirondacks—as a paved multi-use corridor connecting the waterfront to inland neighborhoods. It's primarily flat and accessible, suitable for walking, running, and cycling year-round. The trail links into Burlington's broader network of bike paths and serves as a practical route for both recreation and commuting.
The Burlington Greenway runs 1.3 miles along Lake Champlain's eastern shore in Burlington, Vermont—just across the lake from the Adirondacks. This paved, flat multi-use path connects the waterfront district with several city parks and serves walkers, runners, and cyclists year-round. Access points include multiple trailheads near downtown, making it a convenient out-and-back or point-to-point route for visitors staying in Burlington before heading into the park.
Burns Road is a very short route at just 0.3 miles, likely serving as a connector or access path rather than a destination trail. At this length, it's a quick walk of under ten minutes in either direction. Check local resources to confirm whether it links to longer trail systems or provides trailhead access.
This 3.5-mile trail leads to Burntbridge Pond, a backcountry destination in the Adirondacks that sees less traffic than the region's more prominent water bodies. The route is relatively short for a wilderness trek, making it accessible as a day hike for moderately experienced hikers. Expect typical Adirondack terrain—mixed forest, some wet sections, and gradual elevation changes on the approach to the pond.
Bush Road runs 4.8 miles through the Adirondack backcountry, likely following an old access route or logging corridor common to the region's working forest history. Without maintained trail markers or current condition reports, it's best suited for those comfortable navigating by map and comfortable with variable footing. Check with local outfitters or the DEC for current access points and seasonal usage patterns.
A tenth-of-a-mile mountain bike segment, Buttercup is less a trail than a brief connector or technical feature in a larger network. Trails this short typically serve as alternate lines, skill zones, or links between longer routes. Expect it to appear and disappear quickly—blink-length riding.
This short portage allows paddlers to bypass Buttermilk Falls on the Raquette River, a standard carry on routes between Long Lake and Tupper Lake. At just 0.1 miles, it's a quick haul around the falls. The carry is well-worn and straightforward, typically taking only a few minutes even with a loaded canoe.
Butternut Trail is a very short connector of just 0.1 miles, effectively a brief link rather than a destination hike. Trails this short typically serve as junctions between longer routes or access points to facilities, though without additional context its specific role isn't clear. Expect to walk it in a matter of minutes.
The Byington Trail runs 1.2 miles through the Adirondack backcountry, a short connector that fits easily into a morning or afternoon outing. At just under two kilometers, it's well-suited for families or as a quick leg-stretcher between longer hikes. Check recent trail conditions before heading out, as maintenance schedules for shorter paths can vary.
