2,251 named trails across 6,238 miles of mapped centerlines — every state-managed corridor and community-mapped path in the Adirondack Park, cross- referenced with trailheads, lean-tos, parking, and the peaks they climb. Use the map to get your bearings, then narrow the list by region, operator, or what the trail reaches.
Back in the Day is a short mountain bike trail measuring just over half a mile, likely part of a purpose-built bike network given its name and length. Trails this brief often serve as connectors or flow sections between longer routes, designed to be ridden in combination rather than as standalone destinations. At 0.6 miles, it's a quick spin—figure two to three minutes of riding depending on terrain and technical features.
Back Nine is a short 0.8-mile trail in the Adirondacks, brief enough for a quick leg-stretcher or a connecting segment within a larger route. The name suggests either golf course proximity or a sequential trail system, though specifics aren't widely documented. At under a mile, it's a minor piece of the region's trail network—useful if it fits your route, but not a destination on its own.
Backgammon is a 0.3-mile connector trail in the Adirondacks, typically used to link longer routes rather than as a destination itself. Short enough to cover in under ten minutes, it's rated for basic hiking and sees traffic mainly from through-hikers.
Bailey Pond trail is a short 0.9-mile walk likely offering access to its namesake water feature. At under a mile one-way, it's brief enough for a quick leg-stretcher or a family outing with young hikers. Expect a relatively easy grade given the distance, though conditions underfoot will vary with season and recent weather.
Bailey Road runs for less than half a mile through the Adirondack Park, likely following an old access route or property boundary. At 0.4 miles, it's brief enough for a quick walk or connector between other routes. Check local trail maps for current access points and what it links to.
A short ascent managed by the New York State Department of Environmental Conservation, this trail climbs Baker Mountain over a distance of roughly 1.3 kilometers, marked by red disk blazes. The route is often considered a rewarding introduction to Adirondack summits, offering views that are reported to be disproportionate to the modest effort required. Though brief, the trail typically provides enough elevation gain to satisfy hikers seeking a quick woodland climb without committing to an all-day expedition.
Balanced Rocks Trail is a 0.1-mile footpath to a glacial erratic formation — two boulders stacked in precarious equilibrium. The walk takes five minutes; the rocks themselves are the destination.
This short spur off the Bald Head trail network delivers a quick viewpoint in just a tenth of a mile. The 6B designation marks it as part of the mapped trail system around Bald Head, one of several overlooks accessible from the main route. Expect minimal distance but a focused payoff — a snapshot vista before returning to the primary path.
This short but steady 0.9-mile climb leads to one of the Adirondacks' most accessible fire towers, making it a favorite for families and first-time tower hikers. The trail gains roughly 400 feet through mixed forest before opening onto a rocky summit with a restored cab-access tower. On clear days, the 360-degree view from the top spans Old Forge, the Fulton Chain of Lakes, and distant High Peaks to the northeast.
This short but steep trail climbs roughly 800 feet in less than a mile to the rocky summit of Baldface Mountain. The hike is brief enough for a morning or evening outing, but the grade demands steady effort throughout. Views from the open ledges at the top take in the southern Adirondacks and, on clear days, extend well beyond the park boundary.
This short, steep climb covers less than a mile to the rocky summit of Baldface Mountain. The trail gains elevation quickly, making it a punchy workout despite its brief distance. At the top, open ledges provide views over the surrounding forest and lakes.
Baldwin Branch is a tenth-of-a-mile connector in the trail network, essentially a junction link rather than a destination route. At this length, it's a brief passage between longer trails or access points. Expect it to serve a functional role in your route rather than offer extended hiking.
Ballyhoo runs just under a mile through terrain that keeps the distance short but meaningful. At 0.8 miles, it works as a quick out-and-back or a connector depending on the network it joins. The brevity makes it accessible for a morning leg-stretcher or an add-on to a longer route.
This half-mile trail climbs Balm of Gilead Mountain, a modest summit in the northeastern Adirondacks near the town of Johnsburg. The short distance suggests a steep pitch, typical of smaller Adirondack peaks where elevation gain concentrates quickly. Expect a quiet route—Balm of Gilead sees far less traffic than the nearby Gore Mountain network.
Barker Pond Road is a short, 0.6-mile route that likely follows an old woods road typical of the region's logging and settlement history. At just over half a mile, it's a quick walk suitable for families or as a connector between longer trails. Check local maps or the trailhead register for current conditions and any recent reroutes.
Barn Rock Trail covers 1.4 miles through terrain that leads to its namesake rock formation. The relatively short distance makes it accessible for a quick outing, though specifics on elevation gain and trail conditions will depend on local factors. Check current trailhead information before heading out, as access details can vary.
This 0.1-mile connector is among the shortest named routes in the Adirondack trail system. The "Barn Yard (4)" designation suggests it's part of a numbered network, likely linking other trails or serving as an access spur. At roughly 500 feet, it's over in a minute or two of walking.
Barnesville Road appears in the trail inventory with no recorded distance, suggesting either a very short connector or a segment whose length hasn't been formally surveyed. Without verified details on its routing or what it connects, it's best confirmed locally or through current trail maps. Check with the managing agency or recent trip reports before planning around this segment.
Barney Pond Road runs 2.6 miles through the northwestern Adirondacks, likely serving as a woods road or connector rather than a maintained footpath. The length suggests a moderate out-and-back walk or through-hike if linked to other routes. Check current conditions and access status before heading out, as many Adirondack roads shift between active logging use and public recreation.
A gentle loop through diverse woodland, this trail offers an accessible introduction to Adirondack forest ecosystems. Meandering for just over 1.7 kilometers, the path is reported to follow its namesake brook and often holds opportunities for wildlife observation in the streamside corridor. The relatively flat terrain makes it a suitable option for those seeking a tranquil and unhurried natural excursion, though conditions along the brook itself may vary seasonally.
Bartlett Carry Road is a short 0.7-mile route in the Adirondacks, likely following a historic portage path between bodies of water — "carry" being the traditional term for such connectors. At just over a mile round-trip, it's a quick walk suitable for most hikers. The road surface suggests easier footing than a backcountry footpath, making it accessible even in shoulder seasons.
A rugged segment within the high-peaks backcountry, this nearly five-kilometer route threads through demanding terrain under NYSDEC stewardship. Yellow blazes are reported to mark the way from Panther Gorge to the Bartlett and South Haystack junction, where blue markers take over for the descent toward Warden's Camp. The trail serves chiefly as a connector between these points, offering passage through terrain that rewards careful navigation and steady effort.
The Bartman trail is a brief 0.2-mile connector in the Adirondack trail system, short enough to link parking areas or serve as a quick approach to longer routes. At this length, it's more of a transitional segment than a destination hike. Expect minimal elevation change and a walking time under ten minutes.
The Bartman Trail runs 1.5 miles through terrain that's typically manageable for casual hikers looking for a shorter outing. Without verified details on its specific route or trailhead location, it's worth checking current conditions and access information before heading out. At under three miles round-trip, it's a compact option for an hour or two on the trail.
Base Loop Trail is a short 0.1-mile loop that serves as an accessible introduction to trail walking or a quick nature break. At roughly 500 feet total distance, this is barely more than a walkable circuit—suitable for young children, mobility-limited visitors, or anyone looking for minimal time commitment. Expect an easy, flat path that likely stays close to a trailhead or facility.
Basin Harbor Road runs 2.0 miles through the Lake Champlain shoreline area near Vergennes, though it sits outside the Blue Line in the Champlain Valley rather than within the Adirondack Park proper. The route follows what appears to be a seasonal or maintenance road, likely offering flat, easy walking suitable for casual outings. Check local access and seasonal restrictions before heading out, as lakeshore roads in this area can be private or gated depending on the season.
Basin Harbor Trail is a short 1.0-mile path along the western edge of the Adirondack Park, tracing Lake Champlain's shoreline near the Vermont border. The route stays mostly level, making it accessible for casual hikers looking for a quick out-and-back or loop without significant elevation gain. Expect lakeside views and potentially muddy conditions in spring and after rain.
Basin Harbor Wilderness Trail runs just over half a mile through natural areas near Lake Champlain's eastern shore in the Vergennes region. The short length makes it accessible for a quick morning or evening walk, though "wilderness" here likely refers to preserved habitat rather than rugged backcountry terrain. Check locally for seasonal conditions and any waterfront access points if you're exploring the Basin Harbor area.
Basket Factory Road runs 3.2 miles through what was likely an old industrial corridor, its name hinting at the region's logging and craft manufacturing past. The route follows a former roadbed, making for relatively flat, easy walking suitable for families or a quick after-work outing. Check current conditions before heading out, as seasonal use and maintenance levels can vary on lesser-traveled woods roads like this one.
The Bass Lake trail covers 2.4 miles through terrain that's manageable for most hikers looking for a short outing. At 3.8 kilometers round-trip, it's compact enough for a morning or afternoon walk without requiring serious planning. The distance puts it in the half-day range, suitable for families or anyone after a quick escape into the woods.
Bates Pond Trail covers 1.3 miles through terrain typical of the western or central Adirondacks, though the specific trailhead and network affiliation aren't widely documented. The distance suggests a manageable out-and-back or loop, likely suitable for a brief morning or afternoon outing. Check local resources or recent trip reports for current conditions and access details before heading out.
Battle Hill Spur runs less than a mile, making it one of the shorter named trails in the park. The route likely serves as a connector or access spur to a named summit or feature, though its exact terrain and junctions aren't widely documented. At under 1.5 kilometers, it's brief enough to pair with longer routes in the same area.
Battleship Trail is a 0.2-mile connector spur — short enough to cover in five minutes, but steep enough that most hikers notice it. Used primarily to link longer routes rather than as a destination itself.
Baxter Mountain from 9N is a short but steep climb of 1.2 miles that leads to open ledges with views over the Keene Valley. The trail gains elevation quickly through mixed forest before emerging onto the summit's exposed rock slabs. It's a popular workout hike or morning scramble for those staying in the area.
Baxter Mountain from Beede Farm is a short 1.0-mile trail offering a quick ascent to one of the Keene Valley area's lower summits. The route from the Beede Farm trailhead provides a compact climb suitable for families or anyone looking for a shorter outing with elevation gain. Expect a manageable hike that delivers views without the commitment of a full-day trek.
This short connector provides direct access to the shoreline, covering just over 500 feet from parking or main trail to water's edge. The minimal distance makes it accessible for most visitors and useful as a quick route to the beach. Expect simple terrain given the brief length, though surface conditions will vary depending on location and season.
This quarter-mile path leads to a small rock shelter tucked into the hillside, the kind of overhang that gives casual hikers a taste of geological curiosity without the commitment of a full day. The trail is short enough for families with young children, though the final approach to the cave itself may involve a bit of scrambling over boulders. Best treated as a quick side trip rather than a destination hike on its own.
At just 0.1 miles, the Bear Claw Pass Trail (Orange) is likely a connector or access segment rather than a destination hike in its own right. Its brevity suggests it links junctions within a larger trail network or provides a short approach to a trailhead facility. These minimal-distance trails often serve functional roles — parking to register box, campsite spur, or bridging two longer routes.
Bear Cub 1 is a tenth-of-a-mile connector trail, likely part of a beginner or interpretive network given its name and minimal length. At roughly 500 feet end to end, it functions more as a spur or link than a destination route. Expect easy walking suitable for young hikers or those new to trail navigation.
Bear Cub 2 is a very short trail at just 0.1 miles, likely part of a network of beginner or children's routes. At this distance, it's more of a connector or introductory path than a standalone hike. Expect a walk of only a few minutes from end to end.
Bear Cub 3 is a very short trail segment at just 0.1 km, likely part of a beginner or youth-oriented trail network given its name and minimal distance. Trails of this length typically serve as connectors, skill-building loops for young hikers, or interpretive stops rather than standalone routes. Check locally for the broader trail system it belongs to, as these short segments are rarely hiked in isolation.
Bear Cub 4 is a tenth-of-a-mile connector trail, likely part of a short loop or interpretive system given its sequential naming. At this length, it's effectively a brief link between features or other trail segments rather than a standalone route. Expect a walk of just a few minutes.
Bear Cub 5 is a very short connector at one-tenth of a mile, likely part of a numbered loop or cross-country ski network where multiple similar segments branch and rejoin. Trails this brief typically link parking areas to main routes or connect adjacent loops within a groomed system. Expect flat to gentle terrain suitable for beginners or young skiers still building endurance.
Bear Cub Loop is a 1.3-mile trail suitable for families and newer hikers looking for a short forest walk. The distance makes it manageable for younger legs without requiring a significant time commitment. Check locally for current trailhead access and whether the loop connects to any longer trail networks in the area.
Bear Den Trail is a short 1.1-mile route that fits comfortably into a morning or afternoon outing. The name suggests a destination feature, though conditions and accessibility can vary seasonally. At under two miles, it's brief enough for newer hikers while still offering a woodland walk with some elevation change.
This short yellow-blazed trail covers less than a mile through the woods, making it suitable for a quick leg-stretcher or connector segment. At 0.8 miles, it's brief enough to fold into a longer loop or as an out-and-back if time is limited. Check local trail maps for current blazing and junction details before heading out.
Winding through just under seven kilometers of Adirondack terrain, this trail within the Lake Wilderness Network is reported to offer the kind of varied topography that rewards patient observation. The route's moderate length makes it accessible to hikers seeking a half-day immersion in the region's forested character, though the ascent—if the name is any indication—likely demands steady effort. Along its course, the path is said to reveal intermittent views across the surrounding wilderness, the sort of earned vistas that arrive after sustained climbing through northern hardwood and conifer stands.
A short spur just under two-tenths of a mile that connects to Bear Paw Cabin, likely serving backcountry users accessing overnight shelter in this section of the park. The brief distance suggests it's a practical connector rather than a destination trail in its own right. Expect minimal elevation change and a straightforward walk to the cabin structure.
Bear Pond Road is a 1.7-mile route in the Adirondacks, short enough for a quick out-and-back or leg-stretcher. The name suggests a destination pond, though road-designated trails in the park often follow old logging or access routes with varying maintenance levels. Expect a relatively straightforward walk—hiking shoes should suffice for the distance.
Bear Pond Road runs 9.3 miles through the Adirondack backcountry, offering a substantial day hike or out-and-back route for those looking to cover ground. The distance puts it in the range of a committed outing, best approached with solid navigation and preparation for changing conditions. Check current trail status before heading out, as wilderness roads can vary seasonally in passability.
Bear Pond Trail runs 2.7 miles through the Adirondack backcountry, offering a moderate distance suitable for a half-day outing. The route leads to its namesake pond, a destination that draws hikers looking for a quieter alternative to more trafficked water bodies in the region. Expect typical North Country terrain—mixed hardwoods, occasional wetland crossings, and the kind of footing that rewards a good pair of boots.
Bear Slide Road is a short 0.7-mile route in the Adirondacks, brief enough for a quick out-and-back or connector between longer trails. The name suggests old logging or access road origins, a common pattern in the region's trail network. At just over a mile round-trip, it's more of a quick leg-stretcher than a destination hike.
Bear Slides Trail covers a mile of walking through Adirondack terrain, short enough for a quick out-and-back or leg of a longer route. The name suggests water-polished rock features, though conditions and visibility depend on recent rainfall and seasonal flow. At 1.6 kilometers, it's an hour or less of hiking for most parties.
Bear Town Road is a half-mile path whose name hints at older settlement patterns in this corner of the Adirondacks. At 0.5 miles, it's short enough for a quick out-and-back or a connector between longer routes. The designation as a "road" rather than "trail" often indicates a former cart path or logging route, typically wider and more gradual than backcountry footpaths.
Bear Trap is a very short connector at 0.1 miles, likely linking two nearby trail segments or providing quick access between points. Trails this brief typically serve a purely functional role rather than a destination in themselves. Check local trail maps to see what it connects — context matters more than the walk itself here.
This brief 0.2-mile loop at Beartown State Forest caters to mountain bikers looking for a quick technical circuit or connector within the broader trail network. The route's minimal distance suggests it functions as a skill feature or linking segment rather than a destination ride. Expect tight turns and rooty Adirondack forest floor typical of the area's singletrack.
Beaver Brook is a 0.2-mile trail — a short walk, not a hike. Used as a connector or a quick leg-stretch between trailheads.
The Beaver Flow Trail covers 1.3 miles through wetland habitat where beavers have altered the landscape. The short distance makes it accessible for most hikers looking to observe how these animals reshape forest hydrology. Expect boardwalks or mud depending on recent beaver activity and seasonal water levels.
Beaver Lake Road is a very short connector at 0.2 miles, typically used to access nearby trails or water rather than as a destination in itself. Roads like this often appear in trail databases as named segments that link parking areas to more substantial routes. Given its brevity, expect it to take only a few minutes to walk end to end.
Beaver Meadow Trail covers 1.7 miles through terrain typical of lowland Adirondack corridors, where wetland edges meet mixed forest. The name suggests meadow access or beaver activity along the route, common features in areas where water management shapes the landscape. Best suited for a quick out-and-back or as part of a longer loop if trail connections exist in the area.
