2,251 named trails across 6,238 miles of mapped centerlines — every state-managed corridor and community-mapped path in the Adirondack Park, cross- referenced with trailheads, lean-tos, parking, and the peaks they climb. Use the map to get your bearings, then narrow the list by region, operator, or what the trail reaches.
This 1.9-mile approach trail serves as a connector route, likely linking lower elevations to higher terrain or a main trail network. The name suggests it follows beneath a cliff band or steep section, keeping to more protected ground. Expect moderate grades and a utilitarian character—more about getting somewhere than the walk itself.
This unnamed connector runs just two-tenths of a mile through the backcountry, likely linking established routes or providing access to a feature not formally designated. Without maintained signage or a trail register, it may appear as a use path or old woods road on the ground. Expect minimal clearing and navigation that relies on terrain reading rather than blazes.
This unmapped or unnamed connector appears in trail data but lacks documented details about its route or purpose. At roughly 500 feet, it likely serves as a brief link between established trails or a spur to a feature too minor to warrant formal designation. Without verified trailhead or junction information, it's best confirmed with current maps or local trail networks before relying on it for navigation.
This unnamed connector provides a brief link within the local trail network, though its exact route and purpose aren't documented in available records. At effectively zero recorded length, it likely serves as a short spur or junction point between maintained paths. Check current trail maps or contact the managing organization for its current status and routing.
This unnamed connector runs roughly 0.1 km between two points in the trail network. Its brief length suggests a crossover or linking segment rather than a destination route. Check local signage or trail maps to confirm current routing and conditions.
Upper Brookside is a short 0.4-mile connector in the Adirondacks, brief enough for a quick leg-stretcher or linking segment between longer routes. The minimal distance suggests it's more utilitarian than destination hiking—likely used to access another trail or feature rather than as a standalone outing. Expect to cover it in under 15 minutes at an easy pace.
This short spur off the Stag Brook Falls Trail climbs steeply to the upper cascade, where Stag Brook tumbles over a second series of ledges above the main falls. The route gains elevation quickly in just a tenth of a mile, requiring sure footing on potentially wet rock and roots. It's typically combined with the lower falls as part of a short waterfall loop from Route 73 near Keene.
