2,251 named trails across 6,238 miles of mapped centerlines — every state-managed corridor and community-mapped path in the Adirondack Park, cross- referenced with trailheads, lean-tos, parking, and the peaks they climb. Use the map to get your bearings, then narrow the list by region, operator, or what the trail reaches.
A short but navigationally demanding route in the High Peaks region, this unmarked path leads to Tabletop Mountain and requires careful attention to terrain and route-finding throughout its roughly one-kilometer length. The absence of blazes or maintained treadway means that hikers rely on topographic awareness and often on the faint traces left by previous parties. Though brief in distance, the approach is reported to involve steep, ledgy sections that reward competent navigation with solitude and the satisfaction of earning a summit through skill rather than signage.
Taylor Road is a half-mile route that likely serves as a local connector or access path in the Adirondack region. At just 0.8 kilometers, it's too short to be a destination hike but may provide trail access or link to a larger network. Check current conditions and access status before visiting, as shorter named routes like this sometimes cross private land or serve administrative purposes.
Terahee Truck Trail runs 1.9 miles through the southern Adirondacks, likely following an old logging or access road given the "truck trail" designation. These routes typically offer easier grades and wider tread than footpaths, making them accessible for a range of users. Check current conditions before heading out, as maintenance levels on old forest roads can vary.
Terahee Truck Trail 1 is a short 0.4-mile connector in the northern Adirondacks, likely a remnant woods road now used for hiking or cross-country skiing. At just over half a kilometer, it's brief enough to serve as a link between other routes or as a quick walk into quieter forest. The "truck trail" designation suggests a wide, relatively flat tread — easy going for most users.
The Terry Gordon Bike Path is a short 0.3-mile paved route designed for accessible recreation. At just under half a kilometer, it's suited for families, wheelchairs, and casual riders looking for a brief outing rather than a distance ride. Expect a flat, maintained surface appropriate for all skill levels.
Extending approximately 5.5 kilometers through the High Peaks region, this NYSDEC-maintained route follows blue round blazes over terrain known for its sustained climbs and technical sections. The trail is reported to traverse a series of wooded ridges before emerging onto open ledges where, conditions permitting, hikers are often afforded expansive views across the surrounding wilderness. Though demanding in its gradient and footing, the path rewards those prepared for steep ascents with a quieter alternative to some of the region's more heavily trafficked summits.
A short portage path linking two bodies of water, this route is reported to follow a historic carrying corridor once vital to Adirondack travel. The trail's modest length—just over a mile—and generally level grade make it an accessible walk through mixed woodland, where the quiet effort of passage offers a contemplative counterpoint to the lakes it connects. Though unassuming in character, the path retains something of its utilitarian past, a reminder that these mountains were shaped as much by necessity as by wilderness.
The Eddy Trail is a short 1.4-mile path that likely draws its name from a water feature along its route. At just over two kilometers, it's brief enough for an afternoon walk or as part of a longer loop. Expect a manageable outing suitable for most fitness levels, though specific trailhead details and connecting routes vary by season and maintenance.
The Flume is a named trail in the Adirondack Park with no recorded length data in the system. Without verified distance or difficulty information, it's not possible to characterize the route's commitment level or terrain. Check local ranger stations or the DEC website for current trail conditions and access details before heading out.
This short connector provides access to a viewpoint, covering roughly 0.1 kilometers. The minimal distance suggests a quick spur off a main route rather than a destination hike in itself. Likely maintained as part of a larger trail network where a lookout warranted its own branching path.
The Lookout trail covers just three-tenths of a mile, making it one of the shortest named routes in the park. At half a kilometer, it's brief enough for a quick out-and-back or a spur to a viewpoint, though the name suggests a destination rather than a through route. Expect minimal time commitment—likely under twenty minutes round-trip at a moderate pace.
The Lookout Trail covers just two-tenths of a mile but marks itself faintly enough that hikers should stay alert for blazes or cairns. Short scrambles to viewpoints often go lightly maintained, and this appears to be one of them. At 0.3 kilometers, it's a quick spur worth the effort if you're already nearby and conditions are clear.
This 0.1-mile footbridge in the Adirondacks provides a named crossing, likely over a creek or wetland, and honors Thelma Douglas. Given its brief length, it functions more as infrastructure than destination trail—a connector between trail segments or an access point rather than a hike in itself. The structure probably sees use by hikers passing through on longer routes in the area.
This short connector covers just three-tenths of a mile, likely bridging two other routes in a trail network. Its name suggests a narrow tread or perhaps a ridgeline character, though the minimal distance means you'll cross it quickly either way. Best viewed as part of a longer loop rather than a destination on its own.
Thorp Trail is a short connector at 0.4 miles, the kind of path that typically links longer routes or provides quick access between trailheads. Without verified details on its location or the network it serves, it's best confirmed locally before relying on it as part of a larger route. Short trails like this often see less maintenance than mainline paths.
Three Sisters is a short 1.3-mile trail in the Adirondacks, suitable for a quick out-and-back or loop depending on the network it connects to. The distance makes it accessible for families or as a warm-up hike, though actual difficulty will depend on terrain and elevation gain not specified here. Check local trail guides or trailhead kiosks for current conditions and specific route details before heading out.
A brief interpretive walk through the Adirondack landscape, this trail offers visitors a close look at the geological forces that shaped the region. Spanning roughly three-tenths of a kilometer, the route provides a concise introduction to the thrust faulting that characterizes much of the park's bedrock structure. The trail is part of the Lake Winnepesaukee network and serves those seeking to understand the area's deep geologic history without committing to a longer excursion.
The Ti Haul Recreation Path runs just over a mile through the town of Ticonderoga, offering a short, accessible walk suitable for families and casual outings. The route follows a former rail corridor, keeping grades gentle and the surface even. At 1.1 miles, it's manageable for a quick leg-stretch or a midday break between visits to local historic sites.
Tim's Trail is a 1.0-mile connector marked with pink squares, likely part of a larger trail network in the Adirondacks. The short distance makes it suitable for quick links between longer routes or as an easy out-and-back for families. Check local trail maps to confirm which systems it connects and current blazing conditions.
Tower Road is a 2-mile route in the Adirondacks, short enough for a quick out-and-back or loop depending on its connections. The name suggests either a historic fire tower access or a maintenance road that's since opened to foot traffic. Without verified trailhead or terrain details, it's best confirmed through local sources before planning your approach.
A half-mile connector doing exactly what its name suggests — linking one section of trail network to another near a developed area. These short segments rarely offer much scenery but they matter for completing loops or avoiding road walks. Expect relatively flat, easy terrain given the utilitarian purpose.
This short 0.3-mile path offers a brief walk suitable for quick outings or connections between longer routes. The distance suggests an access trail, connector, or interpretive loop rather than a destination hike in its own right. Check local maps or trailhead signage for what it links to or where it leads.
This 0.1-mile connector follows orange blazes through a brief segment that likely links longer routes or provides access between trailheads. At just two-tenths of a kilometer, it's a transitional piece rather than a destination hike. Check local trail maps to see how it fits into the broader network in its area.
Turkey Lane is a short 0.2-mile connector in the Adirondacks, brief enough to walk in five minutes. Its name suggests historical use as a woods road or property boundary rather than a recreational trail. Given the minimal distance, it likely serves as a link between longer routes or provides access to a trailhead or backwoods feature.
This 1.6-mile loop at Twin Valleys offers a short, accessible route through the property's woodlands, marked with red blazes. The trail provides an easy outing suitable for families or anyone looking for a quick forest walk without significant elevation gain. Expect typical Adirondack mixed forest and a return to your starting point in under an hour.
Twisted Pine is a short connector measuring just two-tenths of a mile, the kind of link trail that typically joins larger routes or accesses a nearby feature. At this length, it's a quick walk—under ten minutes for most hikers—often serving a functional purpose rather than a destination in itself. Check local trail maps to see what it connects, as these brief segments can be easy to overlook but useful for loop-building.
