2,251 named trails across 6,238 miles of mapped centerlines — every state-managed corridor and community-mapped path in the Adirondack Park, cross- referenced with trailheads, lean-tos, parking, and the peaks they climb. Use the map to get your bearings, then narrow the list by region, operator, or what the trail reaches.
Balanced Rocks Trail is a 0.1-mile footpath to a glacial erratic formation — two boulders stacked in precarious equilibrium. The walk takes five minutes; the rocks themselves are the destination.
Barn Rock Trail covers 1.4 miles through terrain that leads to its namesake rock formation. The relatively short distance makes it accessible for a quick outing, though specifics on elevation gain and trail conditions will depend on local factors. Check current trailhead information before heading out, as access details can vary.
A rugged segment within the high-peaks backcountry, this nearly five-kilometer route threads through demanding terrain under NYSDEC stewardship. Yellow blazes are reported to mark the way from Panther Gorge to the Bartlett and South Haystack junction, where blue markers take over for the descent toward Warden's Camp. The trail serves chiefly as a connector between these points, offering passage through terrain that rewards careful navigation and steady effort.
Basin Harbor Trail is a short 1.0-mile path along the western edge of the Adirondack Park, tracing Lake Champlain's shoreline near the Vermont border. The route stays mostly level, making it accessible for casual hikers looking for a quick out-and-back or loop without significant elevation gain. Expect lakeside views and potentially muddy conditions in spring and after rain.
Basin Harbor Wilderness Trail runs just over half a mile through natural areas near Lake Champlain's eastern shore in the Vergennes region. The short length makes it accessible for a quick morning or evening walk, though "wilderness" here likely refers to preserved habitat rather than rugged backcountry terrain. Check locally for seasonal conditions and any waterfront access points if you're exploring the Basin Harbor area.
Baxter Mountain from 9N is a short but steep climb of 1.2 miles that leads to open ledges with views over the Keene Valley. The trail gains elevation quickly through mixed forest before emerging onto the summit's exposed rock slabs. It's a popular workout hike or morning scramble for those staying in the area.
Baxter Mountain from Beede Farm is a short 1.0-mile trail offering a quick ascent to one of the Keene Valley area's lower summits. The route from the Beede Farm trailhead provides a compact climb suitable for families or anyone looking for a shorter outing with elevation gain. Expect a manageable hike that delivers views without the commitment of a full-day trek.
Beaver Brook is a 0.2-mile trail — a short walk, not a hike. Used as a connector or a quick leg-stretch between trailheads.
The Beaver Flow Trail covers 1.3 miles through wetland habitat where beavers have altered the landscape. The short distance makes it accessible for most hikers looking to observe how these animals reshape forest hydrology. Expect boardwalks or mud depending on recent beaver activity and seasonal water levels.
A tranquil path through varied Adirondack terrain, this 4.2-kilometer route meanders alongside wetlands and through quiet forest, marked throughout by blue disks. Maintained by the NYSDEC, the trail is reported to offer glimpses of beaver activity and local wildlife where meadow edges meet woodland. The walking is generally level and unhurried, suited to those seeking a measured immersion in accessible backcountry rather than dramatic elevation or distant views.
A yellow-blazed path maintained by the NYSDEC, this route extends roughly three kilometers through Adirondack backcountry. The trail is reported to offer a modest but engaging walk through mixed forest terrain, suitable for hikers seeking a shorter excursion into the region's wooded landscapes. Though less celebrated than some of its neighbors, the Beckhorn Trail provides access to quieter corners of the preserve where solitude often comes more easily than on better-known routes.
Benny's Trail runs just under 2 miles through the park, a moderate length for a morning or afternoon outing. Without additional context on its network or trailhead, specifics remain limited, but the distance suggests a manageable trek suitable for casual hikers looking to log a few miles. Check local resources or recent trip reports for current conditions and access points.
Big Sky (Dark Blue) is a short 0.8-mile trail likely part of a color-coded network, though its location and specific system aren't confirmed in available records. At just over a kilometer, it suggests a quick out-and-back or connector rather than a destination hike. The "Dark Blue" designation typically indicates intermediate difficulty in many northeastern trail systems, pointing to terrain that's more than a stroll but manageable for steady hikers.
A distinctive path through the Adirondack landscape, this trail stretches just over three kilometers and is maintained by the NYSDEC. Red round blazes mark its course, guiding hikers through terrain that offers a focused exploration of the region. Though modest in length, the route provides access to elevations and perspectives characteristic of the High Peaks area.
This short connector runs just two-tenths of a mile, providing access to Birch Bay. The route is brief enough for quick water access but offers little in the way of extended hiking. Expect minimal elevation change and a straightforward path suited to casual footwear.
Black Kettle Trail is a short 1.1-mile route in the Adirondacks, suitable for a quick out-and-back or loop depending on its configuration. At under two miles, it's accessible for most hikers and can be completed in under an hour. Check locally for current trailhead information and any seasonal conditions that might affect access.
This marker appears to be a street-level memorial or civic installation rather than a hiking trail in the traditional sense. With no recorded distance or route data, it likely represents a painted crosswalk or plaza feature within an Adirondack town or village. Check local community resources for its exact location and significance.
Black Mountain Road runs 2.1 miles through the eastern Adirondacks, serving as a connector or approach route in the Black Mountain area near the shores of Lake George. The terrain here typically follows old road grades that predate modern trail designations, making for straightforward navigation on relatively even ground. This segment often sees use by hikers heading to Black Mountain's summit or linking to longer loop options in the area.
Blaine Road runs 2.1 miles through the Adirondack Park, likely following an old town or logging corridor given its name and modest distance. Roads like this often serve as seasonal access routes or quiet connectors between rural settlements and backcountry areas. Check locally for current surface conditions and whether it's open to foot traffic year-round.
Blake Brook Road is a very short 0.2-mile connector that barely qualifies as a trail by distance alone. Its brevity suggests it's likely a private or seasonal access road rather than a dedicated hiking route, possibly linking to a trailhead, campsite, or remote property. Without additional context, expect a walk-in approach rather than a destination hike.
Blue Trail is a short, half-mile path often used for quick access or as a connector within its network. At just 0.3 miles, it's typically walked in under ten minutes. The brevity makes it useful for loop extensions or as a link between longer routes.
Blue Trail is a very short connector at 0.1 miles, likely serving as a brief link between trailheads, parking areas, or other routes rather than a destination in itself. Given the minimal distance, expect just a few minutes of walking. This type of segment often appears in trail networks where quick access or routing options matter more than the hiking experience itself.
A brief connector within the local woods network, this bypass offers a straightforward alternate route marked by red round blazes. Managed by the NYSDEC, the trail spans just under four-tenths of a kilometer and is reported to provide a more direct passage for hikers navigating the area around Blueberry Cobbles. The path serves a utilitarian purpose rather than a destination in itself, linking other segments of the network with minimal elevation change.
Blueberry Hill is a short 0.3-mile trail that likely takes its name from the wild blueberries common to open ridges and sunny slopes across the park. At just over half a kilometer, it's brief enough for a quick leg-stretch or an evening walk. Exact terrain and ownership aren't confirmed, but trails of this length often serve as connectors or lead to modest viewpoints.
This short spur trail leads to a designated lean-to shelter, offering a quick side trip for overnight backpackers or day hikers looking to check out backcountry accommodations. At 0.3 miles, it's typically an easy walk that branches from a longer trail system to reach the three-sided Adirondack shelter. The lean-to itself sits on or near Blueberry Mountain, providing a stopping point for those planning multi-day trips in the area.
Bluestone Trail covers just 0.3 miles, making it one of the shorter named routes in the Park. At this length, it likely serves as a connector between features or a brief interpretive walk rather than a destination hike. Check local signage or trail registers for current conditions and any seasonal restrictions.
Bobcat Cut is a very short connector at 0.1 miles, likely linking two segments of a larger trail network. At this length, it's more of a brief passage than a destination—possibly a shortcut or bypass around a feature. Expect it to take just a minute or two to walk through.
Bomber Trail covers just 0.1 miles, making it one of the shortest named trails in the park. The name likely references a historic aircraft crash site, a feature found on several brief spur routes in the Adirondacks. At this length, it's more of a marked detour or memorial access than a standalone hike.
This short connector runs just under half a mile through the trail network, marked with orange blazes. At 0.4 miles, it's brief enough to serve as a quick link between longer routes rather than a destination in itself. The name suggests a historical crossing point, though specifics aren't widely documented.
An unmarked route of nearly eight kilometers, this trail through the Boquet River drainage demands careful navigation and rewards those comfortable traveling without blazes or signs. The absence of formal markers is said to be complete, making map and compass work essential throughout the journey. What the path offers in return for that vigilance is a quieter, less-traveled corridor into the backcountry, where the skills of wayfinding become as much a part of the experience as the forest itself.
Boquet Forks Trail - High Water Route is a half-mile alternate path that bypasses stream crossings when Boquet River runs too high to ford safely. Maintained by NYSDEC; used primarily in spring runoff or after heavy rain.
Boquet Mountain Trail is a 2.4-mile route that climbs to the summit of Boquet Mountain in the eastern Adirondacks. The trail gains elevation steadily through mixed forest before reaching open ledges near the top. Expect a moderately challenging ascent with rewarding views of the Champlain Valley from the rocky summit.
Boulder Rush covers half a mile in what's likely a short but concentrated section of terrain. At 0.5 miles, this is a brief outing—closer to a quick scramble or connector than a destination hike. The name suggests rock features or talus, though without verified details on grade or network, expect to scout conditions locally before heading out.
The Boundary Trail covers half a mile through the Adirondack Park, likely marking a property or management boundary as its name suggests. At under a kilometer, it's a brief walk suitable for a quick stretch or connector between longer routes. Check local maps or trailhead signage for current access points and any restrictions tied to boundary designations.
Bramwell Run is a tenth-of-a-mile connector in the trail network, short enough to cover in under five minutes at a casual walk. At this length, it likely serves as a link between other routes or provides access to a trailhead or feature rather than standing as a destination hike. Check current trail maps for its role in a longer route or loop option.
Brewster Road is a half-mile connector route that likely serves as access between trailheads or local points rather than a destination hike in itself. At 0.5 miles, it's brief enough to walk in under 15 minutes at a casual pace. Short segments like this often fill gaps in trail networks or link residential areas to longer routes.
Broad Street is a 0.2-mile connector in the trail network, short enough to serve as a quick link between points rather than a destination in itself. At roughly four-tenths of a kilometer, it's the kind of segment that appears on longer route descriptions or gets used to access other trails. Given the brevity, expect a straightforward walk-through with minimal elevation change.
Broadway Ski Trail is a short half-kilometer connector in what's likely a groomed cross-country network, brief enough to link loops or access other routes rather than serve as a destination itself. At just 0.3 miles, it's a quick transition between junctions or facilities. Check local ski center maps for current grooming status and connections.
Bronson Road is a short 0.4-mile connector route in the Adirondacks, brief enough for a quick leg-stretch or access segment between longer trails or points of interest. Its road designation suggests an old throughway, possibly now gated or unmaintained, typical of historic routes that once linked settlements or logging camps across the backcountry. At under half a mile, it's a minimal commitment—plan it as part of a larger loop or as approach mileage rather than a standalone destination.
Brookside is a brief 0.2-mile connector that lives up to its name, likely following or crossing a small waterway. At this length, it's more transitional than destination—typically linking two longer routes or providing quick access between trailhead and junction. Expect minimal elevation change and a walk measured in minutes rather than hours.
Brown's Notch Trail is a short connector spanning just over half a mile in the Adirondack backcountry. The brief distance suggests it likely links two trail systems or serves as access between features rather than functioning as a destination hike on its own. At under a kilometer, it's the sort of segment that appears on longer route itineraries more often than it gets walked alone.
BTW is a very short connector at 0.4 miles, likely linking two points within a larger trail system. The brevity suggests a quick access route or alternate path rather than a destination trail. Best treated as a functional link — consult local maps or signage to confirm what it connects and whether it suits your route.
Buggy runs a half-mile through terrain typical of short Adirondack connectors or loops, where the name likely hints at historical logging roads or marshy conditions that once made travel difficult. At under a kilometer, it serves as either a quick out-and-back or a link in a longer route. Expect a narrow tread and possibly wet footing depending on recent weather and seasonal drainage.
Burke Road is a short 0.7-mile route that likely functions as a connector or access path within the broader trail network. At just over a kilometer, it's brief enough to be a link between trailheads or a quick out-and-back for those exploring the immediate area. Without additional route details, expect a straightforward walk suitable for standard hiking footwear.
This short waterfront access point extends into Lake Champlain from Burlington's downtown shoreline, offering anglers direct access to deeper water without a boat. At roughly 0.1 km, it's more of a fishing platform than a trail in the traditional sense. Open year-round, though conditions vary with ice and weather.
The Burlington Greenway runs 1.1 miles through Burlington, Vermont—just across Lake Champlain from the Adirondacks—as a paved multi-use corridor connecting the waterfront to inland neighborhoods. It's primarily flat and accessible, suitable for walking, running, and cycling year-round. The trail links into Burlington's broader network of bike paths and serves as a practical route for both recreation and commuting.
The Burlington Greenway runs 1.3 miles along Lake Champlain's eastern shore in Burlington, Vermont—just across the lake from the Adirondacks. This paved, flat multi-use path connects the waterfront district with several city parks and serves walkers, runners, and cyclists year-round. Access points include multiple trailheads near downtown, making it a convenient out-and-back or point-to-point route for visitors staying in Burlington before heading into the park.
Butternut Trail is a very short connector of just 0.1 miles, effectively a brief link rather than a destination hike. Trails this short typically serve as junctions between longer routes or access points to facilities, though without additional context its specific role isn't clear. Expect to walk it in a matter of minutes.
The Byington Trail runs 1.2 miles through the Adirondack backcountry, a short connector that fits easily into a morning or afternoon outing. At just under two kilometers, it's well-suited for families or as a quick leg-stretcher between longer hikes. Check recent trail conditions before heading out, as maintenance schedules for shorter paths can vary.
